HAKRC 45A F4 V2 STACK

Flight Stack Net Weight: 23g
Package Weight: 71.5g
Package Dimensions: Φ64×64×35mm

Flight Controller Specifications

• FC Dimensions: 36×36mm

• FC Net Weight: 8.5g

• Mounting Hole Spacing: 30.5×30.5mm, φ4mm

• Processor: STM32F405RET6

• Gyro: ICM42688

• BEC: 5V/3A; 10V/2.5A

• Storage: 16MB

• Input Voltage: 2–6S

• Firmware: HAKRCF405V2

• UART Ports: 5

• Built-in four programmable RGB LEDs

• Built-in 6-pin VTX connector

• RX2 for SBUS connection

ESC Parameters

• ESC Dimensions: 44×44mm

• ESC Net Weight: 13.5g

• Mounting Hole Spacing: 20/30.5×20/30.5mm, Φ4mm

• Continuous Current: 45A

• Peak Current: 50A (sustainable for 10 seconds)

• Input Voltage: 2-6S

• Current Scale: 160

• Configuration Software: BLHeliSuite16.7.14.9.0.3

• Supported Protocols: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600

Accessories List

• M3 orange vibration damping balls ×8

• 8-pin cables ×2

• LED 4-pin cable ×1

• CRSF Receiver 8-pin cable ×1

• DJI 6-pin connector cable ×1

• Capacitor ×1 (35V 470μF)

• XT60 power connector ×1

• Red/black power wires ×1

• M3×25mm screws ×4

• Black nuts ×4